Snap N Strut nylon pipe, cable, and
The fastest, most versatile, and thoroughly engineered
one-piece hinged pipe hangers, cable hangers, and conduit hangers ever made.
The SNS Wall Spacer is used between a wall
and strut to reduce corrosion and improve ability to clean.
where a fixing bolt or screw is needed, the spacer provides a gap for the bolt
The standard spacer has a 3/8 16 threaded hole in the center but can be
ordered with 1/4 20 thread or various drilled holes.
Each spacer is 3 3/8”
long, 1” wide, and 1/2” tall.
The SnapNStrut line
of pipe hangers is produced from a high-performance, UV stabilized 6/6 nylon resin possessing exceptional long term
stress resistance and chemical stability over a wide range of temperatures.
Produced from a
specialty engineered, high strength,
high temperature nylon resin, the SnapNStrut pipe hangers allow for larger
factors of safety: at 250°F, working temperatures and for intermediate
temperatures up to 480°F. For refrigeration, allowable working temperatures
down to -70°F.
The hinged, snap-on
lock arm adjusts for pipe O.D. variations, affording each hanger the ability to
accommodate several different pipe sizes.
The pipe is nestled in a snug fit without any crimping of its wall.
With a totally
non-metallic design, there is no need to isolate copper tubing. Eliminate the
concern for galvanic corrosion.
The SnapNStrut hangers will withstand most commonly encountered
chemicals and refrigerants, including Freon and Ammonia (chemical
resistance charts available upon request).
The nature of the
nylon material utilized, combined with the uniquely engineered design, absorbs vibration and acts as a cushion
between the piping and its supporting structure.
Versatile hangers for
many different jobs means less inventory required.